1
0
0
czekaj
Opineo.pl
Nick: ryszard, dodano: 8 sierpnia 2024 | 23:56
sklep internetowy: Srubydofelg.pl
Nie ma nad czym dyskutować wszystko OK - nic do zarzucenia. Super.
Przeczytaj opinię
lupa
Search by car models
menu menu
koszyk
koszyk
koszyk
koszyk
Search by car models
Search by car models
zamknij
Zaloguj się
zamknij
SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17
SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17
SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17 SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17 SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17
SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17 SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17 SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17

SICUSTAR wheel locking bolts 12x1,5x38 sphere hex 17

139.00 PLN

plus minus
Availability: out of stock
The SICUSTAR series locks provide double security - in addition to the unique path design, they also have a rotary ring, which precludes them from unscrewing after pounding a socket wrench onto them (the key will rotate together with the ring). The set includes 4 bolts (one for each wheel) with a unique pattern, the adapter between the bolt and an ordinary wheel wrench and a sticker with the combination number (please keep it in case you lose or destroy the key). It is worth noting that the manufacturer offers as many as 400 key combinations in the SICUSTAR series. Sample photos of keys are presented to you on one of the photos, however, due to the number of combinations, you may receive a different pattern than the ones presented. Locking bolts should have the same attributes (diameter, thread pitch, thread length, seating) as normal wheel bolts.
 
  • Thread diameter (M): 12 mm
  • Thread pitch: 1.5
  • Thread (shank) length (L): 38 mm
  • Seating type: sphere
  • Adapter (wrench) diameter: 28 mm (*)
  • Property class: 10.9
  • Coating: zinc plated 12µm + Finigard 105 (**)
  • Key adapter: HEX size 17 mm
  • Manufacturer: Farad (Italy)
 
Additional informations:
  • Number of combinations: 400
  • Key's material hardness: 48 - 52 HRC
  • Torque Tension max. tested: 400 Nm
  • Corrosion resistance: 600 h (**)
  • Additional protection: rotating socket
 
 
(*) The diameter of rim bolt holes must be at least 28 mm. Otherwise, the SICUSTAR key will not fit into the hole in the rim and you will not be able to tighten the locks. However, it is possible to use locks from the SICUBLOC series which have max. diameter (in this case it is the diameter of the head of the bolt because the key goes inside) is 26mm or - in the case of even smaller holes - bolts from the SICUTUNE series with max. diameter equal to 20mm.
(**) Finigard is a passivation method that additionally protects against corrosion. Used on zinc, it gives in the salt test a 5% red rust coverage after min. 600 hours. For comparison, using only zinc, we get a 5% red rust coverage after 96 hours.

 Part number: S972X38